Profile
Prof Ken Evans
Professor of Materials Engineering
(Streatham) 3648
01392 723648
Overview
Prof Ken Evans holds the Chair of Materials Engineering. He is also the Co-Director of Exeter Advanced Technologies, incorporating Exeter Advanced Technologies (X-AT) and the Centre for Additive Layer Manufacturing. His research is on the theoretical and experimental investigation of novel materials, including their processing, fabrication, structure and properties and in their engineering and industrial applications. He has published over 250 research papers and twelve patents.
Prof. Evans is an acknowledged international expert on auxetic materials. These unusual materials exhibit a negative Poisson's ratio (i.e. they expand laterally when stretched). This behaviour has a fundamental influence on the mechanical properties of these materials, with many possible applications, including health, protection and sports applications. Areas of interest include such diverse topics as blast mitigation fabrics, synthetic skin, 'smart' materials, structural honeycombs and foams and open framework ceramics such as zeolites.
Other major areas of interest include additive-layer manufacturing, sustainable materials processing (e.g. recycling of composites) and mechanical metamaterials that exhibit a wide range of unusual properties including negative Poisson's ratios, negative thermal expansion, negative linear compressibility and negative stiffness.
Publications
Copyright Notice: Any articles made available for download are for personal use only. Any other use requires prior permission of the author and the copyright holder.
| 2024 | 2023 | 2022 | 2021 | 2020 | 2019 | 2018 | 2017 | 2016 | 2015 | 2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003 | 2002 | 2001 | 2000 | 1999 | 1998 | 1997 | 1996 | 1995 | 1994 | 1993 | 1992 | 1991 | 1990 | 1989 | 1988 | 1987 | 1986 | 1985 | 1982 | 1981 |
2024
- Galea Mifsud R, Muscat GA, Grima-Cornish JN, Dudek KK, Cardona MA, Attard D, Farrugia P-S, Gatt R, Evans KE, Grima JN. (2024) Auxetics and FEA: Modern Materials Driven by Modern Simulation Methods, Materials, volume 17, no. 7, pages 1506-1506, DOI:10.3390/ma17071506. [PDF]
- McHale G, Alderson A, Armstrong S, Mandhani S, Meyari M, Wells GG, Carter E, Ledesma‐Aguilar R, Semprebon C, Evans KE. (2024) Transforming Auxetic Metamaterials into Superhydrophobic Surfaces, Small Structures, volume 5, no. 4, DOI:10.1002/sstr.202300458.
- Momoh EO, Jayasinghe A, Hajsadeghi M, Vinai R, Evans KE, Kripakaran P, Orr J. (2024) A state-of-the-art review on the application of auxetic materials in cementitious composites, Thin-Walled Structures, volume 196, pages 111447-111447, article no. 111447, DOI:10.1016/j.tws.2023.111447. [PDF]
2023
- Jayasinghe A, Momoh E, Hajsadeghi M, Orr J, Vinai R, Kripakaran P, Evans K. (2023) Participating Formwork with CFRP Textile for Shape-Optimised Concrete Beams: Opportunities and Challenges, fib Symposium, pages 505-512.
- Jayasinghe A, Momoh E, Hajsadeghi M, Orr J, Vinai R, Kripakaran P, Evans K. (2023) Participating Formwork with CFRP Textile for Shape-Optimised Concrete Beams: Opportunities and Challenges, 3rd fib Symposium on Concrete and Concrete Structures, Turin (italy), 9th - 10th Nov 2023.
- McHale G, Alderson A, Armstrong S, Mandhani S, Meyari M, Wells GG, Carter E, Ledesma-Aguilar R, Semprebon C, Evans KE. (2023) Superhydrophobicity of Auxetic Metamaterials, DOI:10.48550/arxiv.2306.02916.
- Marmier A, Miller W, Evans KE. (2023) Negative Poisson’s ratio: A ubiquitous feature of wood, Materials Today Communications, volume 35, DOI:10.1016/j.mtcomm.2023.105810.
2022
- Grima-Cornish JN, Vella-Żarb L, Grima JN, Evans KE. (2022) Boron arsenate and its pressure-dependent auxetic properties, APL Materials, volume 10, no. 9, DOI:10.1063/5.0106074.
- Grima-Cornish JN, Attard D, Vella-Żarb L, Grima JN, Evans KE. (2022) Boron Arsenate Scaled‐Up: An Enhanced Nano‐Mimicking Mechanical Metamaterial, physica status solidi (b), volume 259, no. 12, DOI:10.1002/pssb.202200368.
- Davies R, Evans K, Ghita O. (2022) Multivariate correlation of PolyArylEtherKetone powder properties for additive manufacturing and a method for predicting spreading in polymer powder bed fusion, Powder Technology, volume 410, DOI:10.1016/j.powtec.2022.117871.
- Davies R, Evans K, Ghita O. (2022) Multivariate correlation of PolyArylEtherKetone powder properties for additive manufacturing and a method for predicting spreading in polymer powder bed fusion, Powder Technology, volume 410, pages 117871-117871, article no. 117871, DOI:10.1016/j.powtec.2022.117871. [PDF]
- Evans K, Ghita O. (2022) Characterizing and predicting the self-folding behavior of weft-knit fabrics, Textile Research Journal, pages 1-1, article no. 1, DOI:10.1177/00405175221099670. [PDF]
- Jiang W, Ren X, Wang SL, Zhang XG, Zhang XY, Luo C, Xie YM, Scarpa F, Alderson A, Evans KE. (2022) Manufacturing, characteristics and applications of auxetic foams: A state-of-the-art review, Composites Part B: Engineering, volume 235, pages 109733-109733, article no. 109733, DOI:10.1016/j.compositesb.2022.109733. [PDF]
- Blades L, Hills D, Nowell D, Evans KE, Smith C. (2022) The effects of external loading on low displacement wear rates of unlubricated steels, Wear, volume 490-491, DOI:10.1016/j.wear.2021.204034.
2021
- Grima-Cornish JN, Attard D, Evans KE, Grima JN. (2021) Auxetic-Inspired Honeycomb Macrostructures With Anomalous Tailormade Thermal Expansion Properties Including “Negative” Heat-Shrinking Characteristics, Frontiers in Materials, volume 8, DOI:10.3389/fmats.2021.769879.
- Farrugia P-S, Gatt R, Attard D, Attenborough FR, Evans KE, Grima JN. (2021) The Auxetic Behavior of a General Star-4 Structure, PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS, volume 258, no. 12, article no. ARTN 2100158, DOI:10.1002/pssb.202100158. [PDF]
- Grima-Cornish JN, Attard D, Grima JN, Evans KE. (2021) Auxetic Behavior and Other Negative Thermomechanical Properties from Rotating Rigid Units, physica status solidi (RRL) – Rapid Research Letters, volume 16, no. 2, DOI:10.1002/pssr.202100322. [PDF]
- Mizzi L, Attard D, Evans KE, Gatt R, Grima JN. (2021) Auxetic mechanical metamaterials with diamond and elliptically shaped perforations, Acta Mechanica, volume 232, no. 2, pages 779-791, DOI:10.1007/s00707-020-02881-7.
- Hao L, Tang D, Sun T, Xiong W, Feng Z, Evans KE, Li Y. (2021) Direct Ink Writing of Mineral Materials: A review, International Journal of Precision Engineering and Manufacturing - Green Technology, volume 8, no. 2, pages 665-685, DOI:10.1007/s40684-020-00222-6.
2020
- Benedetti L, Brulé B, Decraemer N, Davies R, Evans KE, Ghita O. (2020) A route to improving elongation of high-temperature laser sintered PEKK, Additive Manufacturing, volume 36, pages 101540-101540, article no. 101540, DOI:10.1016/j.addma.2020.101540. [PDF]
- Benedetti L. (2020) Fundamental Understanding of Poly(ether ketone ketone) for High Temperature Laser Sintering.
- Benedetti L. (2020) Fundamental Understanding of Poly(ether ketone ketone) for High Temperature Laser Sintering.
- Ferguson W. (2020) Auxetic power amplification mechanisms for low frequency vibration energy harvesting.
- Blades L. (2020) An exploration of debris types and their influence on wear rates in fretting.
- Blades L, Hills D, Nowell D, Evans KE, Smith C. (2020) An exploration of debris types and their influence on wear rates in fretting, Wear, volume 450-451, DOI:10.1016/j.wear.2020.203252.
2019
- Benedetti L, Brulé B, Decraemer N, Davies R, Evans K, Ghita O. (2019) Mechanical performance of laser sintered poly(ether ketone ketone) (PEKK), Solid Freeform Fabrication 2019: Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2019, pages 721-734.
- Benedetti L, Brule B, Decreamer N, Evans K, Ghita OR. (2019) Shrinkage behaviour of semi-crystalline polymers in laser sintering: PEKK and PA12, Materials and Design, DOI:10.1016/j.matdes.2019.107906.
- Degabriele EP, Attard D, Grima-Cornish JN, Caruana-Gauci R, Gatt R, Evans KE, Grima JN. (2019) On the Compressibility Properties of the Wine-Rack-Like Carbon Allotropes and Related Poly(phenylacetylene) Systems, Physica Status Solidi (B) Basic Research, volume 256, no. 1, DOI:10.1002/pssb.201800572.
- Farrugia PS, Gatt R, Zammit Lonardelli E, Grima JN, Evans KE. (2019) Different Deformation Mechanisms Leading to Auxetic Behavior Exhibited by Missing Rib Square Grid Structures, Physica Status Solidi (B) Basic Research, volume 256, no. 1, DOI:10.1002/pssb.201800186.
2018
- Benedetti L, Brule B, Decraemer N, Evans K, Ghita OR. (2018) Methods for evaluating particle coalescence and their implications in laser sintering, Powder Technology, volume 342, pages 917-928, DOI:10.1016/j.powtec.2018.10.053.
- Ferguson W, Kuang Y, Kenneth E, Smith C, Zhu M. (2018) Auxetic Structure for Increased Power Output of Strain Vibration Energy Harvester, Sensors and Actuators A: Physical, volume 282, pages 90-96, DOI:10.1016/j.sna.2018.09.019.
- Mizzi L, Mahdi EM, Titov K, Gatt R, Attard D, Evans KE, Grima JN, Tan JC. (2018) Mechanical metamaterials with star-shaped pores exhibiting negative and zero Poisson's ratio, Materials and Design, volume 146, pages 28-37, DOI:10.1016/j.matdes.2018.02.051.
- Wang Y, Chen B, Evans K, Ghita O. (2018) Enhanced Ductility of PEEK thin film with self-assembled fibre-like crystals, Scientific Reports, volume 8, pages 1314-1314, DOI:10.1038/s41598-018-19537-1.
- Marmier A, Biesheuvel S, Elmalik M, Kirke A, Langhof M, Paiva JP, Toudup J, Evans KE. (2018) Evidence of negative Poisson's ratio in wood from finite element analysis and off-axis compression experiments, Materials Letters, volume 210, pages 255-257, DOI:10.1016/j.matlet.2017.09.026.
2017
- Grima‐Cornish JN, Grima JN, Evans KE. (2017) On the Structural and Mechanical Properties of Poly(Phenylacetylene) Truss‐Like Hexagonal Hierarchical Nanonetworks (Phys. Status Solidi B 12/2017), physica status solidi (b), volume 254, no. 12, DOI:10.1002/pssb.201770262. [PDF]
- Degabriele EP, Grima-Cornish JN, Attard D, Caruana-Gauci R, Gatt R, Evans KE, Grima JN. (2017) On the Mechanical Properties of Graphyne, Graphdiyne, and Other Poly(Phenylacetylene) Networks, PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS, volume 254, no. 12, article no. ARTN 1700380, DOI:10.1002/pssb.201700380. [PDF]
- Grima‐Cornish JN, Grima JN, Evans KE. (2017) On the Structural and Mechanical Properties of Poly(Phenylacetylene) Truss‐Like Hexagonal Hierarchical Nanonetworks, physica status solidi (b), volume 254, no. 12, DOI:10.1002/pssb.201700190. [PDF]
- Berretta S, Evans KE, Ghita OR. (2017) Additive manufacture of PEEK cranial implants: Manufacturing considerations versus accuracy and mechanical performance, Materials and Design, volume 139, DOI:10.1016/j.matdes.2017.10.078.
- Chen B, Berretta S, Evans K, Smith K, Ghita O. (2017) A Primary Study into Graphene/Polyether Ether Ketone (PEEK) Nanocomposite for Laser Sintering, Applied Surface Science, DOI:10.1016/j.apsusc.2017.09.226.
- Zhang G, Ghita OR, Lin C, Evans K. (2017) Large-scale manufacturing of helical auxetic yarns using a novel semi-coextrusion process, Textile Research Journal, pages 1-12, DOI:10.1177/0040517517725125.
- Dudek KK, Gatt R, Mizzi L, Dudek MR, Attard D, Evans KE, Grima JN. (2017) On the dynamics and control of mechanical properties of hierarchical rotating rigid unit auxetics, Sci Rep, volume 7, DOI:10.1038/srep46529. [PDF]
2016
- Dodwell TJ, Evans KE, Ghita O, Sandhu AS, Savage L. (2016) Quantifying variability of recycled fibres in composites using multilevel Monte Carlo, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials.
- Dodwell TJ, Evans KE, Ghita O, Sandhu AS, Savage L. (2016) Quantifying variability of recycled fibres in composites using multilevel Monte Carlo, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials.
- Wang Y, Chen B, Evans KE, Ghita OR. (2016) Novel Fibre-like Crystals in Thin Films of Poly Ether Ether Ketone (PEEK), Materials Letters, DOI:10.1016/j.matlet.2016.08.024.
- Berretta S, Evans KE, Ghita OR. (2016) Predicting processing parameters in high temperature laser sintering (HT-LS) from powder properties, Materials & Design, volume 105, pages 301-314, DOI:10.1016/j.matdes.2016.04.097. [PDF]
- Zhang G, Ghita OR, Evans KE. (2016) Dynamic thermo-mechanical and impact properties of helical auxetic yarns, Composites Part B: Engineering, volume 99, pages 494-505, DOI:10.1016/j.compositesb.2016.05.059. [PDF]
- Rizvi A, Smith CW, Rajasekaran R, Evans KE. (2016) Dynamics of dry friction damping in gas turbines: Literature survey, JVC/Journal of Vibration and Control, volume 22, no. 1, pages 296-305, DOI:10.1177/1077546313513051.
- Zhang G, Ghita O, Lin C, Evans KE. (2016) Varying the performance of helical auxetic yarns by altering component properties and geometry, Composite Structures, volume 140, pages 369-377, DOI:10.1016/j.compstruct.2015.12.032. [PDF]
2015
- Wang Y, Beard J, Evans KE, Ghita OR. (2015) Unusual crystalline morphology of Poly Aryl Ether Ketones (PAEKs), RSC Advances, DOI:10.1039/C5RA17110E.
- Beard J, Evans KE, Ghita OR. (2015) Fabrication of Three Dimensional Layered Vertically Aligned Carbon Nanotube Structures and their Potential Applications, RSC Advances, volume 5, pages 104458-104466, DOI:10.1039/c5ra18048a.
- Zhang GH, Ghita OR, Evans KE. (2015) The fabrication and mechanical properties of a novel 3-component auxetic structure for composites, Composites Science and Technology, volume 117, pages 257-267, DOI:10.1016/j.compscitech.2015.06.012. [PDF]
- Siddorn M, Coudert F-X, Evans K, Marmier ASH. (2015) A systematic typology for negative Poisson's ratio materials and the prediction of complete auxeticity in pure silica zeolite JST, Physical Chemistry Chemical Physics, DOI:10.1039/C5CP01168J. [PDF]
- Brookbank P, Savage L, Evans KE. (2015) Economical carbon and cellulosic sheet moulding compounds for semi- and non-structural applications, Journal of Reinforced Plastics and Composites, volume 34, no. 6, pages 437-453, DOI:10.1177/0731684415572437. [PDF]
- Beard JD, Evans KE, Ghita OR. (2015) Control and Modelling of Capillary Flow of Epoxy Resin in Aligned Carbon Nanotube Forests, RSC Advances, DOI:10.1039/C5RA03393D.
- Berretta S, Evans KE, Ghita O. (2015) Processability of PEEK, a New Polymer for High Temperature Laser Sintering (HT-LS), European Polymer Journal, DOI:10.1016/j.eurpolymj.2015.04.003.
- Aumjaud P, Fieldsend JE, Boucher M-A, Evans K, Smith C. (2015) Multi-objective optimisation of viscoelastic damping inserts in honeycomb sandwich structures, Composite Structures, volume 132, pages 451-463.
- Aumjaud P, Smith CW, Evans KE. (2015) A novel viscoelastic damping treatment for honeycomb sandwich structures, Composite Structures, volume 119, pages 322-332, DOI:10.1016/j.compstruct.2014.09.005.
2014
- Savage L, Evans K. (2014) The importance of the mesostructure in toughening cellulosic short fibre composites, Composites Science and Technology, volume 93, pages 97-105, DOI:10.1016/j.compscitech.2014.01.003. [PDF]
- Berger MA, Evans KE, Smith CW. (2014) On the effective strain tensor in heterogeneous materials, Mathematics and Mechanics of Solids, pages 1-10, article no. 1081286514521092, DOI:10.1177/1081286514521092.
- Bhattacharya S, Zhang GH, Ghita O, Evans KE. (2014) The variation in Poisson’s ratio caused by interactions between core and wrap in helical composite auxetic yarns, Composites Science and Technology, volume 102, pages 87-93, DOI:10.1016/j.compscitech.2014.07.023.
- Berretta S, Ghita OR, Evans KE. (2014) Morphology of polymeric powders in Laser Sintering (LS): From Polyamide to new PEEK powders, European Polymer Journal, DOI:10.1016/j.eurpolymj.2014.08.004.
- Ghita OR, James E, Davies R, Berreta S, Singh B, Flint S, Evans KE. (2014) High Temperature Laser Sintering: An investigation into mechanical properties and shrinkage characteristics of Poly (Ether Ketone) structures, Materials and Design, DOI:10.1016/j.matdes.2014.04.035.
- Ghita OR, James E, Trimble R, Evans KE. (2014) Physico-chemical behaviour of Poly (Ether Ketone) (PEK) in High Temperature Laser Sintering (HT-LS), Journal of Materials Processing Technology, volume 214, no. 4, pages 969-978, DOI:10.1016/j.jmatprotec.2013.11.007.
- Berretta S, Ghita O, Evans KE, Anderson A, Newman C. (2014) Size, shape and flow of powders for use in Selective Laser Sintering (SLS), High Value Manufacturing: Advanced Research in Virtual and Rapid Prototyping - Proceedings of the 6th International Conference on Advanced Research and Rapid Prototyping, VR@P 2013, pages 49-54.
- Aumjaud P, Smith CW, Fieldsend JE, Evans KE. (2014) Optimised location and orientation of passive viscoelastic dampers for lightweight sandwich structures, 16th International Conference on Experimental Mechanics.
2013
- Grima JN, Caruana-Gauci R, Wojciechowski KW, Evans KE. (2013) Smart hexagonal truss systems exhibiting negative compressibility through constrained angle stretching, Smart Materials and Structures, volume 22, no. 8, DOI:10.1088/0964-1726/22/8/084015.
- Boucher M-A, Smith CW, Scarpa F, Rajasekaran R, Evans KE. (2013) Effective topologies for vibration damping inserts in honeycomb structures, Composite Structures, volume 106, pages 1-14, DOI:10.1016/j.compstruct.2013.05.036.
- Strano G, Hao L, Everson RM, Evans KE. (2013) A new approach to the design and optimisation of support structures in additive manufacturing, International Journal of Advanced Manufacturing Technology, volume 66, no. 9-12, pages 1247-1254, DOI:10.1007/s00170-012-4403-x.
- Allen RJ, Ghita OR, Farmer B, Beard M, Evans KE. (2013) Mechanical testing and modelling of a vertically aligned carbon nanotube composite structure, Composite Science and Technology, volume 77, pages 1-7, DOI:10.1016/j.compscitech.2013.01.001.
- Strano G, Hao L, Everson RM, Evans KE. (2013) Surface roughness analysis, modelling and prediction in selective laser melting, Journal of Materials Processing Technology, volume 213, no. 4, pages 589-597, DOI:10.1016/j.jmatprotec.2012.11.011.
2012
- Allen RJ, Ghita O, Farmer B, Beard M, Evans KE. (2012) Wetting mechanisms of Vertically Aligned Carbon nanotube (VACNT) composite structures in readiness for additive layer manufacture, ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials.
- Farmer BL, Allen RA, Ghita O, Beard MA, Evans KE. (2012) Strategies to combine nanocomposite and additive layer manufacturing techniques to build materials and structures simultaneously, ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials.
- Strano G, Hao L, Everson RM, Evans KE. (2012) A new approach to the design and optimisation of support structures in additive manufacturing, International Journal of Advanced Manufacturing Technology, pages 1-8.
- Xi Z, Ghita OR, Evans KE. (2012) The unusual thermal expansion behavior of PTFE/GF composites incorporating PTFE/GF recyclate, Composites Part A: Applied Science and Manufacturing, DOI:10.1016/j.compositesa.2012.07.013.
- Miller W, Ren Z, Smith CW, Evans KE. (2012) A negative Poisson's ratio carbon fibre composite using a negative Poisson's ratio yarn reinforcement, Composites Science and Technology, volume 72, no. 7, pages 761-766, DOI:10.1016/j.compscitech.2012.01.025.
- Miller W, Ren Z, Smith CW, Evans KE. (2012) A negative Poisson's ratio carbon fibre composite using a negative Poisson's ratio yarn reinforcement, Composites Science and Technology, volume 72, no. 7, pages 761-766.
- Taylor CM, Smith CW, Miller W, Evans KE. (2012) Functional grading in hierarchical honeycombs: Density specific elastic performance, Composite Structures.
- Wright JR, Burns MK, James E, Sloan MR, Evans KE. (2012) On the design and characterisation of low-stiffness auxetic yarns and fabrics, Textile Research Journal, volume 82, no. 7, pages 645-654, DOI:10.1177/0040517512436824.
- Miller W, Ren Z, Smith CW, Evans KE. (2012) A negative Poisson's ratio carbon fibre composite using a negative Poisson's ratio yarn reinforcement, Composites Science and Technology.
- Kao CC, Ghita OR, Hallam KR, Heard PJ, Evans KE. (2012) Mechanical studies of single glass fibres recycled from hydrolysis process using sub-critical water, Composites Part A: Applied Science and Manufacturing, volume 43, no. 3, pages 398-406, DOI:10.1016/j.compositesa.2011.11.011.
- Barnes DL, Miller W, Evans KE, Marmier A. (2012) Modelling negative linear compressibility in tetragonal beam structures, MECHANICS OF MATERIALS, volume 46, pages 123-128, DOI:10.1016/j.mechmat.2011.12.007. [PDF]
- Grima JN, Chetcuti E, Manicaro E, Attard D, Camilleri M, Gatt R, Evans KE. (2012) On the auxetic properties of generic rotating rigid triangles, PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, volume 468, no. 2139, pages 810-830, DOI:10.1098/rspa.2011.0273. [PDF]
2011
- Farmer B, Beard MA, Ghita O, Allen R, Evans K. (2011) Assembly Strategies for Fully Aligned and and Dispersed Morphology Controlled Carbon Nanotube Reinforced Composites Grown in Net-shape, Materials Research Society (MRS), Boston, Massachusetts, 29th Nov - 3rd Dec 2010, MRS Proceedings, volume 1304, DOI:10.1557/opl.2011.602.
- Strano G, Hao L, Everson RM, Evans KE. (2011) Multi-objective optimization of selective laser sintering processes for surface quality and energy saving, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, volume 225, no. 9, pages 1673-1682, DOI:10.1177/0954405411402925.
- Jerrard PGE, Hao L, Dadbakhsh S, Evans KE. (2011) Consolidation behaviour and microstructural characteristics of Al and a mixture of Al-Cu alloy powders following selective laser melting processing, Lasers in Engineering, volume 22, no. 5-6, pages 371-381.
- Strano G, Hao L, Everson RM, Evans KE. (2011) Multi-objective optimization of selective laser sintering processes for surface quality and energy saving, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, volume 225, no. B9, pages 1673-1682, DOI:10.1177/0954405411402925. [PDF]
- Sloan MR, Wright JR, Evans KE. (2011) The helical auxetic yarn - A novel structure for composites and textiles; Geometry, manufacture and mechanical properties, Mechanics of Materials, volume 43, no. 9, pages 476-486, DOI:10.1016/j.mechmat.2011.05.003.
- Beard MA, Bradbury J, Ghita O, Flint S, Evans K. (2011) Material Characterisation of Additive Manufacturing Components Made From a High Temperature Thermoplastic Polymer, Advanced Research in Virtual and Rapid Prototyping (VRAP), Leiria, Portugal, 28th Sep - 1st Oct 2011.
- Strano G, Hao L, Everson RM, Evans KE. (2011) Surface Roughness in Selective Laser Melting, International Conference on Advanced Research in Virtual and Rapid Prototyping, Leiria, Portugal.
- Amela-Cortés M, Bruce DW, Evans KE, Smith CW. (2011) Unsymmetric main-chain liquid crystal elastomers with tunable phase behaviour: Elastic response, Journal of Materials Chemistry, volume 21, no. 23, pages 8436-8442, DOI:10.1039/c0jm03692g.
- Amela-Cortés M, Heinrîch B, Donnio B, Evans KE, Smith CW, Bruce DW. (2011) Unsymmetric main-chain liquid crystal elastomers with tuneable phase behaviour: Synthesis and mesomorphism, Journal of Materials Chemistry, volume 21, no. 23, pages 8427-8435, DOI:10.1039/c0jm03691a.
- Taylor CM, Smith CW, Miller W, Evans KE. (2011) The effects of hierarchy on the in-plane elastic properties of honeycombs, International Journal of Solids and Structures, volume 48, no. 9, pages 1330-1339, DOI:10.1016/j.ijsolstr.2011.01.017.
- Palumbo NMA, Smith CW, Miller W, Evans KE. (2011) Near-zero thermal expansivity 2-D lattice structures: Performance in terms of mass and mechanical properties, Acta Materialia, volume 59, no. 6, pages 2392-2403, DOI:10.1016/j.actamat.2010.12.037.
- Grima JN, Ravirala N, Galea R, Ellul B, Attard D, Gatt R, Alderson A, Rasburn J, Evans KE. (2011) Modelling and testing of a foldable macrostructure exhibiting auxetic behaviour, Physica Status Solidi (B) Basic Research, volume 248, no. 1, pages 117-122, DOI:10.1002/pssb.201083982.
- Miller W, Smith CW, Evans KE. (2011) Honeycomb cores with enhanced buckling strength, Composite Structures, volume 93, no. 3, pages 1072-1077, DOI:10.1016/j.compstruct.2010.09.021.
- Beard MA, Ghita O, Evans K. (2011) Monitoring the Effects of Selective Laser Sintering (SLS) Build Parameters on Polyamide Using Near Infrared Spectroscopy, Journal of Applied Polymer Science, volume 121, pages 3153-3158, DOI:10.1002/app.33898.
- Beard MA, Ghita OR, Evans KE. (2011) Using Raman Spectroscopy to Monitor Surface Finish and Roughness of Components Manufactured by Selective Laser Sintering (SLS), Journal of Raman Spectroscopy, volume 42, pages 744-748, DOI:10.1002/jrs.2771.
- Gaspar N, Smith CW, alderson A, grima J, evans K. (2011) A Generalised Three-Dimensional Tethered-Nodule Model for Auxetic Materials, Journal of Materials Science, volume 46, pages 372-384.
2010
- Jerrard PGE, Hao L, Dadbakhsh S, Evans KE. (2010) Consolidation behaviour and microstructure characteristics of pure aluminium and alloy powders following Selective Laser Melting processing, PROCEEDINGS OF THE 36TH INTERNATIONAL MATADOR CONFERENCE, pages 487-490, DOI:10.1007/978-1-84996-432-6_108. [PDF]
- Miller W, Smith CW, Scarpa FL, Evans KE. (2010) Enhancing Buckling Limits in Honeycombs for Composite Sandwich Panels, ICEM 14: 14TH INTERNATIONAL CONFERENCE ON EXPERIMENTAL MECHANICS, VOL 6, volume 6, DOI:10.1051/epjconf/20100624001. [PDF]
- Xi Z, Ghita OR, Johnston P, Evans KE. (2010) Novel Remanufacturing Process of Recycled Polytetrafluoroethylene(PTFE)/GF Laminate, International Conference on Advances in Materials and Processing Technologies, Paris, France, 24th - 27th Oct 2010.
- Lethbridge ZAD, Walton RI, Marmier ASH, Smith CW, Evans KE. (2010) Elastic anisotropy and extreme Poisson's ratios in single crystals, ACTA MATERIALIA, volume 58, no. 19, pages 6444-6451, DOI:10.1016/j.actamat.2010.08.006. [PDF]
- Wright JR, Sloan MR, Evans KE. (2010) Tensile properties of helical auxetic structures: A numerical study, Journal of Applied Physics, volume 108, pages 1-8, article no. 044905.
- Beard MA, Ghita OR, Evans KE. (2010) Using Raman Spectroscopy to Monitor Surface Finish and Roughness of Components Manufactured by Selective Laser Sintering (SLS), Journal of Raman Spectroscopy.
- Beard MA, Ghita O, Evans KE. (2010) Evaluation of Laser Energy Density Effects on Mechanical Properties of Selective Laser Sintering Components Using Raman Spectroscopy, International Conference on Additive Technologies (ICAT), Slovenia.
- Palmer J, Savage L, Ghita OR, Evans KE. (2010) Sheet Moulding Compound (SMC) From Carbon Fibre Recyclate, Composites Part A – Applied Science and Manufacturing, volume 41, pages 1232-1237, DOI:10.1016/j.compositesa.2010.05.005.
- Strano G, Hao L, Evans KE, Everson RM. (2010) Optimisation of quality and energy consumption for additive layer manufacturing processes, IET Conference Publications, volume 2010, no. 565 CP, pages 364-369, DOI:10.1049/cp.2010.0458.
- Lethbridge ZAD, Walton RI, Marmier ASH, Smith CW, Evans KE. (2010) Elastic anisotropy and extreme Poisson’s ratios in single crystals, Acta Materialia, volume 58, no. 19, pages 6444-6451, DOI:10.1016/j.actamat.2010.08.006. [PDF]
- Marmier A, Lethbridge ZAD, Walton RI, Smith CW, Parker SC, Evans KE. (2010) ElAM: A computer program for the analysis and representation of anisotropic elastic properties, Computer Physics Communications, volume 181, pages 2102-2115.
- Hughes TP, Marmier A, Evans KE. (2010) Auxetic frameworks inspired by cubic crystals, International Journal of Solids and Structures, volume 47, pages 1469 - 1476-1469 - 1476, article no. 11-12, DOI:10.1016/j.ijsolstr.2010.02.002. [PDF]
- Alderson A, Alderson KL, Miller W, Attard D, Farrugia PS, Gatt R, Zeid KM, Ravirala N, Grima JN, Smith CW. (2010) Elastic constants of 3-, 4- and 6- connected chiral and antichiral honeycombs subject to uniaxial in-plane loading, Composites Science and Technology, volume 70, pages 1042-1048, DOI:10.1016/j.compscitech.2009.07.009.
- Miller W, Smith CW, Scarpa F, Evans KE. (2010) Flatwise buckling optimization of hexachiral and tetrachiral honeycombs, Composites Science and Technology, volume 70, no. 7, pages 1049-1056, DOI:10.1016/j.compscitech.2009.10.022.
- Abramovitch H, burgard M, Edery-Azulay L, evans K, hoffmeister M, miller W, scarpa F, Smith CW, tee K. (2010) Smart tetrachiral and hexachiral honeycomb: sensing and impact detection, Composites Science and Technology, volume 70, no. 7, pages 1072-1079, DOI:10.1016/j.compscitech.2009.07.017.
- Lorato A, Innocenti P, scarpa F, alderson A, alderson K, zied K, ravirala N, miller W, Smith CW, evans K. (2010) The transverse elastic properties of chiral honeycombs, Composites Science and Technology, volume 70, pages 1057-1063.
- miller W, Smith CW, scarpa FL, evans K. (2010) Flatwise buckling optimization of hexachiral and tetrachiral honeycombs, Composites Science and Technology, volume 70, pages 1049-1056.
- Miller W, Smith CW, Dooling P, Burgess AN, Evans KE. (2010) Reduced thermal stress in composites via negative thermal expansion particulate fillers, Composites Science and Technology, volume 70, no. 2, pages 318-327, DOI:10.1016/j.compscitech.2009.11.003.
- Ren XJ, Smith CW, Evans K, Dooling P, Burgess A, wiechers J, Zahlan N. (2010) Elastic Deformation of Materials under Distributed Shear Loading, Experimental Mechanics, volume 50, no. 5, pages 651-659, DOI:10.1007/s11340-009-9256-3.
2009
- Miller W, Smith CW, Scarpa FL, Abramovich H, Evans KE. (2009) Multifunctional chiral negative poisson's ratio (auxetic) honeycomb cores with embedded piezo-ceramic patches, ICCM International Conferences on Composite Materials.
- Palmer J, Ghita O, Savage L, Evans KE. (2009) New automotive composites based on glass and carbon fibre recyclate, ICCM International Conferences on Composite Materials.
- Beard MA, Ghita OR, McCabe J, Evans KE. (2009) Monitoring Dehydration Kinetics of Theophylline Monohydrate Using Simultaneous Thermal and Spectral Methods, Journal of Raman Spectroscopy, volume 40, DOI:10.1002/jrs.2560.
- Palmer J, Ghita O, Savage L, Evans KE. (2009) New Automotive Composites based on Glass and Carbon Fibre Recyclte, International Conference of Composite Materials (ICCM17), Edinburgh, 2009.
- Miller W, Smith CW, MacKenzie DS, Evans KE. (2009) Negative thermal expansion: A review, Journal of Materials Science, volume 44, no. 20, pages 5441-5451, DOI:10.1007/s10853-009-3692-4.
- W. Miller, P.B. Hook, C.W. Smith, X. Wang, K.E. Evans. (2009) Manufacture and Characterisation of a Novel, Low Modulus, Negative Poisson’s Ratio Composite, Composites Science and Technology, volume 69, pages 651-655, DOI:10.1016/j.compscitech.2008.12.016.
- N. Gaspar, CW Smith, KE Evans. (2009) Auxetic behaviour and anisotropic heterogeneity, Acta Materialia, volume 57, pages 875-880, DOI:10.1016/j.actamat.2008.10.043.
- Alderson A, Evans KE. (2009) Deformation mechanisms leading to auxetic behaviour in the α-cristobalite and α-quartz structures of both silica and germania, J Phys Condens Matter, volume 21, no. 2, DOI:10.1088/0953-8984/21/2/025401. [PDF]
- Williams JJ, Lethbridge ZAD, Clarkson GJ, Ashbrook SE, Evans KE, Walton RI. (2009) The bulk material dissolution method with small amines for the synthesis of large crystals of the siliceous zeolites ZSM-22 and ZSM-48, Microporous and Mesoporous Materials, volume 119, no. 1-3, pages 259-266, DOI:10.1016/j.micromeso.2008.10.023.
- Palmer JP, Ghita OR, Savage L, Evans KE. (2009) Successful Closed-Loop Recycling of Thermoset Composites, Composites Part A � Applied Science and Manufacturing - accepted.
- Horrigan EJ, Smith CW, Scarpa F, Gaspar N, Javadi AA, Berger MA, Evans KE. (2009) Constitutive Modelling and Simulated Optimisation of Disordered Structures with negative Poisson’s ratios, Mechanics of Materials, volume 41, pages 919-927, DOI:10.1016/j.mechmat.2009.04.008.
- Newby W, Sloan M, Evans KE. (2009) Hemp: A novel material for use in the friction industry?, Natural Fibres '09, Iom3, Carlton House Terrace, London, Uk, 14th - 15th Dec 2009, N/A.
- Donoghue JP, Alderson KL, Evans KE. (2009) The fracture toughness of composite laminates with a negative Poisson's ratio, Physica Status Solidi (B) Basic Research, volume 246, no. 9, pages 2011-2017, DOI:10.1002/pssb.200982031.
2008
- Abramovitch H, Burgard M, Edery-Azulay L, Evans KE, Hoffmeister M, Miller W, Scarpa F, Smith CW, Tee KF, Schönecker A. (2008) Sensing and actuation of smart chiral honeycombs, Proceedings of SPIE - The International Society for Optical Engineering, volume 6935, DOI:10.1117/12.775588.
- Ghita OR, Baker DC, Evans KE. (2008) "An in-line near infrared process control tool for monitoring the effects of speed, temperature and polymer colour in injection moulding ", Polymer Testing, volume 27, pages 459-469.
- Abramovitch H, Burgard M, Edery-Azulay L, Evans KE, Hoffmeister M, Miller W, Scarpa F, Smith CW, Tee KF, Schoenecker A. (2008) Sensing and actuation of smart chiral honeycombs, HEALTH MONITORING OF STRUCTURAL AND BIOLOGICAL SYSTEMS 2008, volume 6935, DOI:10.1117/12.775588. [PDF]
- Webber RS, Alderson KL, Evans KE. (2008) A novel fabrication route for auxetic polyethylene, part 2: Mechanical properties, Polymer Engineering and Science, volume 48, no. 7, pages 1351-1358, DOI:10.1002/pen.21110.
- Hatwell GE, Hao L, Sewell NT, Evans KE. (2008) Simulation of energy absorption in nylon 12 powders during selective laser sintering.
- Miller W, Mackenzie DS, Smith CW, Evans KE. (2008) A Generalised Scale-independent Mechanism for Tailoring of Thermal Expansivity; Positive and Negative, Mechanics of Materials, volume 40, pages 351-361, DOI:10.1016/j.mechmat.2007.09.004.
- Sanchez-Valle C, Lethbridge ZAD, Sinogeikin SV, Williams JJ, Walton RI, Evans KE, Bass JD. (2008) Negative Poisson's ratios in siliceous zeolite MFI-silicalite, J Chem Phys, volume 128, no. 18, DOI:10.1063/1.2912061. [PDF]
- Jerrard P, Hao L, Sewell NT, Evans KE, Felstead M. (2008) Consolidation of Austenitic and Martensitic powder mixtures via selective laser melting.
- Miller W, Mackenzie DS, Smith CW, Evans KE. (2008) A Generalised Scale-independent Mechanism for Tailoring of Thermal Expansivity; Positive and Negative, Mechanics of Materials, volume 40, pages 351-361.
- Ghita OR, Beard MA, McCabe J, Bottom R, Richmond J, Evans KE. (2008) A Study into First and Second Order Thermal Transitions of Materials using Spectral DSC, Journal of Materials Science, volume 43, pages 4988-4995, DOI:10.1007/s10853-008-2735-6.
- Palmer J, Ghita OR, Savage L, Evans KE. (2008) Recyclate fibres �matrix interface analysis for reuse in sheet moulding compounds (SMC).
- Miller W, Smith CW, Dooling P, Burgess AN, Evans KE. (2008) Tailored thermal expansivity in particulate composites for thermal stress management, Physica Status Solidi (B) Basic Research, volume 245, no. 3, pages 552-556, DOI:10.1002/pssb.200777710.
- Ghita OR, Baker DC, Evans KE. (2008) An in-line near-infrared process control tool for monitoring the effects of speed, temperature, and polymer colour in injection moulding, Polymer Testing, volume 27, no. 4, pages 459-469, DOI:10.1016/j.polymertesting.2008.01.010.
- Miller W, Smith CW, Scarpa FL, Abramovich H, Evans KE. (2008) Multifunctional Negative Poisson’s ratio (Auxetic) Honeycomb Cores with Embedded Piezo-ceramic Patches, European Conference on Compsite Materials 13, Stockholm, Sweden.
2007
- Scarpa F, Lorato A, Celuch M, Wegrzyniak P, Rudnicki J, Smith C, Evans K. (2007) Quasistatic dielectric properties of negative Poisson's ratio hexachiral honeycombs, IEEE Antennas and Propagation Society, AP-S International Symposium (Digest), pages 5519-5522, DOI:10.1109/APS.2007.4396798.
- Horrigan EJH, Smith CW, Javadi AA, Evans KE. (2007) Disordered Microstructures and Anomalous Physical Properties, Metfoam 2007, Montreal, Canada, 1st - 1st Jan 2007.
- Tomlinson SK, Ghita OR, Hooper RM, Evans KE. (2007) Investigation of the setting mechanism of a novel dental cement using infrared spectroscopy, Vibrational Spectroscopy.
- Williams JJ, Smith CW, Evans KE, Lethbridge ZAD, Walton RI. (2007) An analytical model for producing negative Poisson's ratios and its application in explaining off-axis elastic properties of the NAT-type zeolites, Acta Materialia, volume 55, no. 17, pages 5697-5707, DOI:10.1016/j.actamat.2007.06.011.
- Tabor GR, Beard MA, Evans KE, Ritchie SJK. (2007) Numerical investigation and visualisation of polymer behavior within a capillary die, Polymer Engineering & Science, volume 47, no. 10, pages 1688-1694, DOI:10.1002/pen.20857.
- Horrigan EJ, Javadi AA, Smith CW, Gaspar N, Evans KE. (2007) Disordered Microstructures and Anomalous Physical Properties.
- Grima JN, Zammit V, Gatt R, Alderson A, Evans KE. (2007) Auxetic behaviour from rotating semi-rigid units, Physica Status Solidi (B) Basic Research, volume 244, no. 3, pages 866-882, DOI:10.1002/pssb.200572706.
- Alderson A, Rasburn J, Evans KE. (2007) Mass transport properties of auxetic (negative Poisson's ratio) foams, Physica Status Solidi (B) Basic Research, volume 244, no. 3, pages 817-827, DOI:10.1002/pssb.200572701.
- Alderson KL, Webber RS, Evans KE. (2007) Microstructural evolution in the processing of auxetic microporous polymers, Physica Status Solidi (B) Basic Research, volume 244, no. 3, pages 828-841, DOI:10.1002/pssb.200572702.
- Tomlinson SK, Ghita OR, Hooper RM, Evans KE. (2007) Monomer conversion and hardness of novel dental cements based on ethyl cyanoacrylate, Dent Mater, volume 23, no. 7, pages 799-806, DOI:10.1016/j.dental.2006.06.027. [PDF]
- Grima JN, Gatt R, Zammit V, Williams JJ, Evans KE, Alderson A, Walton RI. (2007) Natrolite: A zeolite with negative Poisson's ratios, Journal of Applied Physics, volume 101, no. 8, DOI:10.1063/1.2718879.
- Beard MA, Tabor GR, Ritchie SKJ, Evans KE, Walton RI. (2007) Development of Freeze Flow Apparatus to Study Filled Polymer Melts, Polymer Engineering and Science, volume 47, no. 11, pages 1937-1942.
- Tomlinson SK, Ghita OR, Hooper RM, Evans KE. (2007) Investigation of the setting mechanism of a novel dental cement using infrared spectroscopy, Vibrational Spectroscopy, DOI:10.1016/j.vibspec.2007.03.009.
- Williams JJ, Smith CW, Evans KE, Lethbridge ZAD, Walton RI. (2007) Development of An Analytical Model to Produce Negative Poisson\'s Ratios and its Application for Explaining Off-Axis Elastic Properties of the NAT-type Zeolites, Acta Mat (in press), volume 55, no. 17, pages 5697-5707.
- williams J, Smith CW, Evans KE, Lethbridge ZAD, Walton RI. (2007) Off-axis elastic properties and the effect of extraframework species on structural flexibility of the NAT-type zeolites: Simulations of structure and elastic properties, Chemistry of Materials, volume 19, no. 10, pages 2423-2434, DOI:10.1021/cm062473w.
2006
- Javadi AA, Smith CW, Evans KE, Farmani R, Abu A. (2006) Topology optimisation of auxetic materials.
- Grima JN, Gatt R, Ravirala N, Alderson A, Evans KE. (2006) Negative Poisson's ratios in cellular foam materials, Materials Science and Engineering: A, volume 423, no. 1-2, pages 214-218, DOI:10.1016/j.msea.2005.08.229.
- Javadi AA, Evans KE, Smith CW. (2006) Optimum design of auxetic materials using evolutionary algorithms and finite element method.
- Lethbridge ZAD, Williams JJ, Walton RI, Smith CW, Hooper RM, Evans KE. (2006) Direct, static measurement of single-crystal Young’s moduli of the zeolite natrolite: Comparison with dynamic studies and simulations, Acta Materialia, volume 54, no. 9, pages 2533-2545, DOI:10.1016/j.actamat.2006.01.034.
- Grima JN, Evans KE. (2006) Auxetic behavior from rotating triangles, Journal of Materials Science, volume 41, no. 10, pages 3193-3196, DOI:10.1007/s10853-006-6339-8.
- Ren XJ, Smith CW, Evans KE, Dooling PJ, Burgess AN, Zahlan N, Rawlings AV, Wiechers JW. (2006) Experimental Testing and Numerical Modelling of Human Skin, IFSCC Magazine, volume 8, pages 95-98.
- Williams, J.J., Walton, R.I.. (2006) On the Elastic Constants of the Zeolite, Chlorosodalite, Applied Physics Letters, volume 88, no. 2.
- Javadi AA, Smith CW, Evans KE. (2006) Topological optimisation of auxetic materials using evolutionary algorithms, "abstract submitted to the First International Conference on Auxetics and Anomalous Systems, 4-6 September 2006, University of Exeter, Exeter, UK".
- Sloan M, Savage L, Evans K, Hooper B. (2006) Natural fibres in friction materials, "SAE International 24th Annual Brake Colloquium and Exhibition, Texas, USA. Also published in SAE 2006 Transactions - Journal of materials and manufacturing".
- Tomlinson SK, Ghita OR, Hooper RM, Evans KE. (2006) The use of near-infrared spectroscopy for the cure monitoring of an ethyl cyanoacrylate adhesive, Vibrational Spectroscopy, volume 40, pages 133-141.
- Grima JN, Gatt R, Alderson A, Evans KE. (2006) An alternative explanation for the negative Poisson's ratios in α-cristobalite, Materials Science and Engineering: A, volume 423, no. 1-2, pages 219-224, DOI:10.1016/j.msea.2005.08.230.
- Tomlinson SK, Ghita OR, Hooper RM, Evans KE. (2006) Biocements based on Cyanoacrylate Composites and Ionomer Hybrids.
- Ren XJ, Smith CW, Evans KE, Dooling PJ, Burgess A, Wiechers J, Zahlan N. (2006) Experimental and numerical investigations of the deformation of soft materials under tangential loading, International Journal of Solids and Structures, volume 43, no. 7-8, pages 2364-2377.
- Burns MK, Wright JR, Hook PB, Evans KE. (2006) The Development of an Auxetic Blast Curtain, Exeter.
2005
- Ren XJ, Smith CW, Evans KE, Dooling PJ, Burgess AN, Zahlan N, Rawlings AV, Wiechers JW. (2005) Experimental testing and numerical modeling of human skin, International Journal of Cosmetic Science, volume 27, no. 5, pages 299-299, DOI:10.1111/j.0142-5463.2005.00278_2.x.
- Alderson A, Davies PJ, Evans KE, Alderson KL, Grima JN. (2005) Modelling of the mechanical and mass transport properties of auxetic molecular sieves: An idealised inorganic (zeolitic) host-guest system, Molecular Simulation, volume 31, no. 13, pages 889-896, DOI:10.1080/08927020500378055.
- Gaspar N, Smith CW, Behne EA, Seidler GT, Evans KE. (2005) Quantitative Analysis of the Microscale of Auxetic Foams, Physica Status Solidi B, volume 242, pages 550-560.
- Alderson KL, Webber RS, Kettle AP, Evans KE. (2005) Novel fabrication route for auxetic polyethylene. Part 1. Processing and microstructure, Polymer Engineering and Science, volume 45, no. 4, pages 568-578, DOI:10.1002/pen.20311.
- Alderson KL, Simkins VR, Coenen VL, Davies PJ, Alderson A, Evans KE. (2005) How to make auxetic fibre reinforced composites, Physica Status Solidi (B) Basic Research, volume 242, no. 3, pages 509-518, DOI:10.1002/pssb.200460371.
- Grima JN, Alderson A, Evans KE. (2005) Auxetic behaviour from rotating rigid units, Physica Status Solidi (B) Basic Research, volume 242, no. 3, pages 561-575, DOI:10.1002/pssb.200460376.
- Grima JN, Gatt R, Farrugia PS, Alderson A, Evans KE. (2005) Auxetic cellular materials and structures, American Society of Mechanical Engineers, Aerospace Division (Publication) AD, volume 70 AD, pages 489-495, DOI:10.1115/IMECE2005-82260.
- Sanchez-Valle C, Sinogeikin SV, Lethbridge ZAD, Walton RI, Smith CW, Evans KE, Bass JD. (2005) Brillouin scattering study on the single-crystal elastic properties of natrolite (NAT) and analcime (ANA) zeolites, J Appl Phys.
- Alderson A, Davies PJ, Williams MR, Evans KE, Alderson KL, Grima JN. (2005) Modelling of the mechanical and mass transport properties of auxetic molecular sieves: An idealised organic (polymeric honeycomb) host-guest system, Molecular Simulation, volume 31, no. 13, pages 897-905, DOI:10.1080/08927020500385852.
- Lethbridge ZAD, Williams JJ, Walton RI, Evans KE, Smith CW. (2005) Methods for the Synthesis of Large Crystals of Silicate Zeolites, Microporous and Mesoporous Materials, volume 79, pages 339-352.
- Grima JN, Gatt R, Alderson A, Evans KE. (2005) On the auxetic properties of 'rotating rectangles' with different connectivity, Journal of the Physical Society of Japan, volume 74, no. 10, pages 2866-2867, DOI:10.1143/JPSJ.74.2866.
- Grima JN, Alderson A, Evans KE. (2005) An alternative explanation for the negative poisson's ratios in auxetic foams, Journal of the Physical Society of Japan, volume 74, no. 4, pages 1341-1342, DOI:10.1143/JPSJ.74.1341.
- Liu, P., Griffin, A.C., Evans, K.E. (2005) Morphology and Deformation Behaviour of a Liquid Crystalline Polymer Containing Laterally Attached Pentaphenyl Rods, Macromolecular Chemistry and Physics, volume 206, no. 2, pages 233-239.
- Smith CW, Tan KH, Evans KE. (2005) Mechanical Properties of the Novel Organometallic Polymer Poly(ferrocenyldimethylsilane), Journal of Polymer Science B, volume 43, no. 17, pages 2280-2288.
- Grima JN, Gatt R, Alderson A, Evans KE. (2005) On the origin of auxetic behaviour in the silicate α-cristobalite, Journal of Materials Chemistry, volume 15, no. 37, pages 4003-4005, DOI:10.1039/b508098c.
- Lethbridge ZAD, Williams JJ, Walton RI, Evans KE, Smith CW. (2005) Methods for the Synthesis of Large Crystals of Silicate Zeolites, Microporous and Mesoporous Materials, volume 79, pages 339-352.
- He C, Liu P, Griffin AC, Smith CW, Evans KE. (2005) Morphology and Deformation Behaviour of a Liquid Crystalline Polymer Containing Laterally Attached Pentaphenyl Rods, Macromolecular Chemistry and Physics, volume 206, pages 233-239.
- Gaspar N, Smith CW, Behne EA, Seidler GT, Evans KE. (2005) Quantitative Analysis of the Microscale of Auxetic Foams, Physica Status Solidi B, volume 242, pages 550-560.
- Dumitrescu OR, Baker DC, Foster GM, Evans KE. (2005) Near infrared spectroscopy for in-line monitoring during injection moulding, Polymer Testing, volume 24, pages 367-375.
- Grima JN, Gatt R, Alderson A, Evans KE. (2005) On the potential of connected stars as auxetic systems, Molecular Simulation, volume 31, no. 13, pages 925-935, DOI:10.1080/08927020500401139.
- Grima JN, Williams JJ, Gatt R, Evans KE. (2005) Modelling of auxetic networked polymers built from calix[4]arene building blocks, Molecular Simulation, volume 31, no. 13, pages 907-913, DOI:10.1080/08927020500392114.
- Alderson A, Alderson KL, Evans KE, Grima JN, Williams M. (2005) Modelling of negative poisson's ratio nanomaterials: Deformation mechanisms, structure-property relationships and applications, Journal of Metastable and Nanocrystalline Materials, volume 23, pages 55-58, DOI:10.4028/www.scientific.net/JMNM.23.55.
- Alderson A, Alderson KL, Evans KE, Grima JN, Williams MR, Davies PJ. (2005) Modelling the deformation mechanisms, structure-property relationships and applications of auxetic nanomaterials, Physica Status Solidi (B) Basic Research, volume 242, no. 3, pages 499-508, DOI:10.1002/pssb.200460370.
- Grima JN, Williams JJ, Evans KE. (2005) Networked calix[4]arene polymers with unusual mechanical properties, Chem Commun (Camb), no. 32, pages 4065-4067, DOI:10.1039/b505839b. [PDF]
- Grima JN, Gatt R, Bray TGC, Alderson A, Evans KE. (2005) Empirical modelling using dummy atoms (EMUDA): An alternative approach for studying "auxetic" structures, Molecular Simulation, volume 31, no. 13, pages 915-924, DOI:10.1080/08927020500401121.
- Gaspar N, Ren XJ, Smith CW, Grima JN, Evans KE. (2005) Novel Honeycombs with Auxetic Behaviour, Acta Materialia, volume 53, no. 8, pages 2439-2445.
2004
- ALDERSON A, ALDERSON KL, EVANS KE, GRIMA JN, WILLIAMS MR, DAVIES PJ. (2004) MOLECULAR MODELLING OF THE DEFORMATION MECHANISMS ACTING IN AUXETIC SILICA, Computational Methods in Science and Technology, volume 10, no. 2, pages 117-126, DOI:10.12921/cmst.2004.10.02.117-126.
- GRIMA JN, ALDERSON A, EVANS KE. (2004) NEGATIVE POISSON'S RATIOS FROM ROTATING RECTANGLES, Computational Methods in Science and Technology, volume 10, no. 2, pages 137-145, DOI:10.12921/cmst.2004.10.02.137-145.
- Foster GM, Ritchie S, Evans KE, Lowe C. (2004) Controlled relative humidity testing for the characterisation of the brittle-tough and glass transition temperatures of coil coating paint films, Progress in Organic Coatings, volume 51, no. 3, pages 244-249, DOI:10.1016/j.porgcoat.2004.08.002.
- Evans KE, Alderson KL, Donoghue JP. (2004) The design, matching and manufacture of auxetic carbon fibre laminates, Journal of Composite Materials, volume 38, no. 2, pages 95-106, DOI:10.1177/0021998304038645.
- Grima JN, Gatt R, Alderson A, Evans KE. (2004) Modeling the auxetic behaviour in alpha-cristobalite, ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, volume 228, pages U901-U901. [PDF]
2003
- Wootton RJ, Herbert RC, Young PG, Evans KE. (2003) Approaches to the structural modelling of insect wings, Philos Trans R Soc Lond B Biol Sci, volume 358, no. 1437, pages 1577-1587, DOI:10.1098/rstb.2003.1351. [PDF]
- Macleod NA, Beard M, Evans KE, Ritchie SJK, Agra-Gutierrez A, Legrix A. (2003) Impact toughness properties of filled High Density Polyethylene, "In proceedings of IOM Deformation, Yield and Fracture Conference, Churchill April 7-10, 2003".
- Smith CW, Evans KE, Gaspar N. (2003) Effect of heterogeneity on the elastic properties of auxetic materials, Journal of Applied Physics, volume 94, no. 9, pages 6143-6149, DOI:10.1063/1.1614847.
- Grima JN, Wood M, Alderson A, Evans KE. (2003) Zeolites with unusual mechanical properties, ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, volume 226, pages U773-U773. [PDF]
2002
- Evans KE, Alderson A. (2002) Molecular origin of auxetic behaviour in tetrahedral framework silicates, Physical Review Letters, volume 89, no. 22, DOI:10.1103/PhysRevLett.89.225503.
2001
- Evans KE. (2001) Auxetic polymers, Membrane Technology, volume 2001, no. 137, DOI:10.1016/s0958-2118(01)80300-1.
- Evans KE, Alderson A. (2001) Rotation and dilation deformation mechanisms for auxetic behaviour in the alpha-cristobalite tetrahedral framework structure , Physics and Chemistry of Minerals, volume 28, no. 10, pages 711-718, DOI:10.1007/s002690100209.
- Evans KE, Alderson A, Mullarky PG, Rasburn J. (2001) Auxetic structures for variable permeability systems, AIChE Journal, volume 47, no. 11, pages 2623-2632, DOI:10.1002/aic.690471125.
- Alderson, A.. (2001) Deformation Mechanisms for Auxetic Behaviour in a Tetrahedral Framework Structure, Physics and Chemistry of Minerals, volume 28, no. 10, pages 711-718.
- Alderson A, Rasburn J, Evans KE, Grima JN. (2001) Auxetic polymeric filters display enhanced de-fouling and pressure compensation properties, Membrane Tech, volume 137, no. 6-8.
- Rasburn J, Mullarkey PG, Evans KE, Alderson A, Ameer-Beg S, Perrie W. (2001) Auxetic structures for variable permeability systems, AIChE Journal, volume 47, no. 11, pages 2623-2626, DOI:10.1002/aic.690471125.
2000
- Wootton RJ, Evans KE, Herbert R, Smith CW. (2000) Erratum: The hind wing of the desert locust (Schistocera gregaria forskal). I. Functional morphology and mode of operation (Journal of Experimental Biology (2000) 203 (2921-2931)), Journal of Experimental Biology, volume 203, no. 23.
- Evans KE, Alderson KL. (2000) Auxetic materials: the positive side of being negative, Engineering Science and Education Journal, volume 9, no. 4, pages 148-154, DOI:10.1049/esej:20000402.
- Evans KE, Alderson A. (2000) Auxetic materials: Functional materials and structures from lateral thinking!, Advanced Materials, volume 12, no. 9, pages 617-628, DOI:10.1002/(SICI)1521-4095(200005)12:9<617::AID-ADMA617>3.0.CO;2-3.
- Smith CW, Grima JN, Evans KE. (2000) Novel mechanism producing negative Poisson�s ratios in reticulated foams, Acta Materialia, volume 48, pages 4349-4356.
- Wootton RJ, Evans KE, Herbert R, Smith CW. (2000) The hind wing of the desert locust (Schistocerca gregaria Forskål). I. Functional morphology and mode of operation, J Exp Biol, volume 203, no. Pt 19, pages 2921-2931, DOI:10.1242/jeb.203.19.2921. [PDF]
- Grima JN, Alderson A, Evans KE. (2000) Zeolites with negative Poisson's ratios, ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, volume 220, pages U516-U516. [PDF]
- Alderson A, Rasburn J, Ameer-Beg S, Mullarkey PG, Perrie W, Evans KE. (2000) An auxetic filter: A tuneable filter displaying enhanced size selectivity or defouling properties, Industrial and Engineering Chemistry Research, volume 39, no. 3, pages 654-665, DOI:10.1021/ie990572w.
- Webber RS, Alderson KL, Evans KE. (2000) Novel variations in the microstructure of the auxetic microporous ultra-high molecular weight polyethylene. Part 1: processing and microstructure, Polymer Engineering and Science, volume 40, no. 8, pages 1894-1905, DOI:10.1002/pen.11321.
- Smith CW, Herbert R, Wootton RJ, Evans KE. (2000) The hind wing of the desert locust (Schistocerca gregaria Forskål). II. Mechanical properties and functioning of the membrane, J Exp Biol, volume 203, no. Pt 19, pages 2933-2943, DOI:10.1242/jeb.203.19.2933. [PDF]
- Herbert RC, Young PG, Smith CW, Wootton RJ, Evans KE. (2000) The hind wing of the desert locust (Schistocerca gregaria Forskål). III. A finite element analysis of a deployable structure, J Exp Biol, volume 203, no. Pt 19, pages 2945-2955, DOI:10.1242/jeb.203.19.2945. [PDF]
- Alderson KL, Fitzgerald A, Evans KE. (2000) The strain dependent indentation resilience of auxetic microporous polyethylene, Journal of Materials Science, volume 35, no. 16, pages 4039-4047, DOI:10.1023/A:1004830103411.
- Grima JN, Jackson R, Alderson A, Evans KE. (2000) Do zeolites have negative Poisson's ratios?, Advanced Materials, volume 12, no. 24, pages 1912-1918, DOI:10.1002/1521-4095(200012)12:24<1912::AID-ADMA1912>3.0.CO;2-7.
- Alderson KL, Webber RS, Evans KE. (2000) Novel variations in the microstructure of auxetic ultra-high molecular weight polyethylene. Part 2: mechanical properties, Polymer Engineering and Science, volume 40, no. 8, pages 1906-1914, DOI:10.1002/pen.11322.
- Wootton RJ, Evans KE, Herbert R, Smith CW. (2000) The hind wing of the desert locust (Schistocerca gregaria Forskal).: I.: Functional morphology and mode of operation. (vol 203, pg 2921, 2000), JOURNAL OF EXPERIMENTAL BIOLOGY, volume 203, no. 23, pages U4-U4. [PDF]
- Smith CW, Grima JN, Evans KE. (2000) Novel mechanism for generating auxetic behaviour in reticulated foams: Missing rib foam model, Acta Materialia, volume 48, no. 17, pages 4349-4356, DOI:10.1016/S1359-6454(00)00269-X.
- Grima JN, Evans KE. (2000) Networked polymers with negative Poisson's ratios, ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, volume 220, pages U348-U348. [PDF]
- Grima JN, Evans KE. (2000) Auxetic behavior from rotating squares, Journal of Materials Science Letters, volume 19, no. 17, pages 1563-1565, DOI:10.1023/A:1006781224002.
- Grima JN, Evans KE. (2000) Self expanding molecular networks, Chemical Communications, no. 16, pages 1531-1532, DOI:10.1039/b004305m.
1999
- Savic DA, Evans KE, Silberhorn T. (1999) A genetic algorithm-based system for the optimal design of laminates, Computer-Aided Civil and Infrastructure Engineering, volume 14, no. 3, pages 187-197, DOI:10.1111/0885-9507.00140.
- Smith CW, Wootton RJ, Evans.K.E.. (1999) Interpretation of Experimental Data for Poisson�s Ratio of Highly Non-Linear Materials, Experimental Mechanics, volume 39, pages 356-362.
- Smith CW, Lehman F, Wootton RJ, Evans KE. (1999) Strain dependent densification during indentation in auxetic foams, CELLULAR POLYMERS, volume 18, no. 2, pages 79-101. [PDF]
- Chan N, Evans KE. (1999) Mechanical properties of conventional and auxetic foams. Part I: Compression and tension, Journal of Cellular Plastics, volume 35, no. 2, pages 130-165, DOI:10.1177/0021955X9903500204.
- Chan N, Evans KE. (1999) Mechanical properties of conventional and auxetic foams. Part II: Shear, Journal of Cellular Plastics, volume 35, no. 2, pages 166-183, DOI:10.1177/0021955X9903500205.
1998
- Roach AM, Evans KE, Jones N. (1998) The penetration energy of sandwich panel elements under static and dynamic loading. Part I, Composite Structures, volume 42, no. 2, pages 119-134, DOI:10.1016/S0263-8223(98)00061-0.
- Roach AM, Jones N, Evans KE. (1998) The penetration energy of sandwich panel elements under static and dynamic loading. Part II, Composite Structures, volume 42, no. 2, pages 135-152, DOI:10.1016/S0263-8223(98)00062-2.
- Alderson KL, Alderson A, Webber RS, Evans KE. (1998) Evidence for uniaxial drawing in the fibrillated microstructure of auxetic microporous polymers, Journal of Materials Science Letters, volume 17, no. 16, pages 1415-1419, DOI:10.1023/A:1026409404057.
- Chan N, Evans KE. (1998) Indentation resilience of conventional and auxetic foams, Journal of Cellular Plastics, volume 34, no. 3, pages 231-260, DOI:10.1177/0021955X9803400304.
1997
- Alderson A, Evans KE. (1997) Modelling concurrent deformation mechanisms in auxetic microporous polymers, Journal of Materials Science, volume 32, no. 11, pages 2797-2809, DOI:10.1023/A:1018660130501.
- Chan N, Evans KE. (1997) Fabrication methods for auxetic foams, Journal of Materials Science, volume 32, no. 22, pages 5945-5953, DOI:10.1023/A:1018606926094.
- Alderson KL, Webber RS, Mohammed UF, Murphy E, Evans KE. (1997) An experimental study of ultrasonic attenuation in microporous polyethylene, Applied Acoustics, volume 50, no. 1, pages 23-33, DOI:10.1016/S0003-682X(96)00023-0.
- Alderson KL, Alderson A, Evans KE. (1997) The interpretation of the strain-dependent Poisson's ratio in auxetic polyethylene, Journal of Strain Analysis for Engineering Design, volume 32, no. 3, pages 201-212, DOI:10.1243/0309324971513346.
- Chan N, Evans KE. (1997) Microscopic examination of the microstructure and deformation of conventional and auxetic foams, Journal of Materials Science, volume 32, no. 21, pages 5725-5736, DOI:10.1023/A:1018665617008.
1996
- Pickles AP, Alderson KL, Evans KE. (1996) Effects of powder morphology on the processing of auxetic polypropylene (PP of negative Poisson's ratio), Polymer Engineering and Science, volume 36, no. 5, pages 643-650.
- Pickles AP, Alderson KL, Evans KE. (1996) The effects of powder morphology on the processing of auxetic polypropylene (pp of negative poisson's ratio), Polymer Engineering and Science, volume 36, no. 5, pages 636-642, DOI:10.1002/pen.10451.
- Evans KE. (1996) Materials divisions, MATERIALS WORLD, volume 4, no. 2, pages 98-98. [PDF]
- Masters IG, Evans KE. (1996) Models for the elastic deformation of honeycombs, Composite Structures, volume 35, no. 4, pages 403-422, DOI:10.1016/S0263-8223(96)00054-2.
1995
- Caddock BD, Evans KE. (1995) Negative Poisson ratios and strain-dependent mechanical properties in arterial prostheses, Biomaterials, volume 16, no. 14, pages 1109-1115, DOI:10.1016/0142-9612(95)98908-w. [PDF]
- Alderson KL, Kettle AP, Neale PJ, Pickles AP, Evans KE. (1995) The effect of the processing parameters on the fabrication of auxetic polyethylene - Part II The effect of sintering temperature and time, Journal of Materials Science, volume 30, no. 16, pages 4069-4075, DOI:10.1007/BF00360710.
- Alderson A, Evans KE. (1995) Microstructural modelling of auxetic microporous polymers, Journal of Materials Science, volume 30, no. 13, pages 3319-3332, DOI:10.1007/BF00349875.
- Pickles AP, Webber RS, Alderson KL, Neale PJ, Evans KE. (1995) The effect of the processing parameters on the fabrication of auxetic polyethylene - Part I The effect of compaction conditions, Journal of Materials Science, volume 30, no. 16, pages 4059-4068, DOI:10.1007/BF00360709.
- Evans KE, Alderson A, Christian FR. (1995) Auxetic two-dimensional polymer networks. An example of tailoring geometry for specific mechanical properties, Journal of the Chemical Society, Faraday Transactions, volume 91, no. 16, pages 2671-2680, DOI:10.1039/FT9959102671.
- Neale PJ, Pickles AP, Alderson KL, Evans KE. (1995) The effect of the processing parameters on the fabrication of auxetic polyethylene - Part III The effect of extrusion conditions, Journal of Materials Science, volume 30, no. 16, pages 4087-4094, DOI:10.1007/BF00360712.
1994
- Alderson KL, Pickles AP, Neale PJ, Evans KE. (1994) Auxetic polyethylene: The effect of a negative poisson's ratio on hardness, Acta Metallurgica Et Materialia, volume 42, no. 7, pages 2261-2266, DOI:10.1016/0956-7151(94)90304-2.
- NKANSAH MA, EVANS KE, HUTCHINSON IJ. (1994) MODELING THE MECHANICAL-PROPERTIES OF AN AUXETIC MOLECULAR NETWORK, MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, volume 2, no. 3, pages 337-352, DOI:10.1088/0965-0393/2/3/004. [PDF]
- Evans KE, Nkansah MA, Hutchinson IJ. (1994) Auxetic foams: Modelling negative Poisson's ratios, Acta Metallurgica Et Materialia, volume 42, no. 4, pages 1289-1294, DOI:10.1016/0956-7151(94)90145-7.
1993
- Neale PJ, Alderson KL, Pickles AP, Evans KE. (1993) Negative Poisson's ratio of microporous polyethylene in compression, Journal of Materials Science Letters, volume 12, no. 19, pages 1529-1532, DOI:10.1007/BF00277087.
- Alderson KL, Evans KE. (1993) Strain-dependent behaviour of microporous polyethylene with a negative Poisson's ratio, Journal of Materials Science, volume 28, no. 15, pages 4092-4098, DOI:10.1007/BF00351238.
- Nkansah MA, Evans KE, Hutchinson IJ. (1993) Modelling the effects of negative Poisson's ratios in continuous-fibre composites, Journal of Materials Science, volume 28, no. 10, pages 2687-2692, DOI:10.1007/BF00356204.
1992
- Alderson KL, Evans KE. (1992) The fabrication of microporous polyethylene having a negative Poisson's ratio, Polymer, volume 33, no. 20, pages 4435-4438, DOI:10.1016/0032-3861(92)90294-7.
- Alderson KL, Evans KE. (1992) Dynamic analysis of filament wound pipes undergoing low velocity transverse impact, Composites Science and Technology, volume 45, no. 1, pages 17-22, DOI:10.1016/0266-3538(92)90118-M.
- Alderson KL, Evans KE. (1992) Low velocity transverse impact of filament-wound pipes: Part 1. Damage due to static and impact loads, Composite Structures, volume 20, no. 1, pages 37-45, DOI:10.1016/0263-8223(92)90010-A.
- Wenchao Z, Evans KE. (1992) A fortran program for the design of laminates with required mechanical properties, Computers and Structures, volume 45, no. 5-6, pages 919-939, DOI:10.1016/0045-7949(92)90051-Z.
- Alderson KL, Evans KE. (1992) Failure mechanisms during the transverse loading of filament-wound pipes under static and low velocity impact conditions, Composites, volume 23, no. 3, pages 167-173, DOI:10.1016/0010-4361(92)90437-Y.
- Evans KE, Alderson KL, Marks PR. (1992) Modelling of the transverse loading of filament wound pipes, Computers and Structures, volume 45, no. 5-6, pages 1089-1095, DOI:10.1016/0045-7949(92)90064-7.
- Evans KE, Alderson KL. (1992) The static and dynamic moduli of auxetic microporous polyethylene, Journal of Materials Science Letters, volume 11, no. 24, pages 1721-1724, DOI:10.1007/BF00736221.
- Evans KE, Alderson KL. (1992) Low velocity transverse impact of filament-wound pipes: Part 2. Residual properties and correlations with impact damage, Composite Structures, volume 20, no. 1, pages 47-52, DOI:10.1016/0263-8223(92)90011-Z.
- Evans KE, Nkansah MA, Hutchinson IJ. (1992) Modelling negative poisson ratio effects in network-embedded composites, Acta Metallurgica Et Materialia, volume 40, no. 9, pages 2463-2469, DOI:10.1016/0956-7151(92)90164-A.
1991
- Evans KE, Nkansah MA, Hutchinson IJ, Rogers SC. (1991) Molecular network design [7], Nature, volume 353, no. 6340, DOI:10.1038/353124a0.
- Meduoye GO, Bacon DJ, Evans KE. (1991) Computer modelling of temperature and stress distributions in LEC-grown GaAs crystals, Journal of Crystal Growth, volume 108, no. 3-4, pages 627-636, DOI:10.1016/0022-0248(91)90242-W.
- Evans KE. (1991) Auxetic polymers: a new range of materials, Endeavour, volume 15, no. 4, pages 170-174, DOI:10.1016/0160-9327(91)90123-S.
- Evans KE. (1991) The design of doubly curved sandwich panels with honeycomb cores, Composite Structures, volume 17, no. 2, pages 95-111, DOI:10.1016/0263-8223(91)90064-6.
1990
- Evans K. (1990) Tailoring the negative Poisson ratio, Chemistry and Industry (London), no. 20, pages 654-657.
- Caddock BD, Evans KE, Hull D. (1990) Stress-corrosion failure envelopes for E-glass fibre bundles, Journal of Materials Science, volume 25, no. 5, pages 2498-2502, DOI:10.1007/BF00638049.
- Caddock BD, Devenish RW, Evans KE. (1990) Submicrometre resolution measurement of the composition profile through E‐glass fibres subjected to stress‐corrosion, Journal of Microscopy, volume 160, no. 1, pages 31-39, DOI:10.1111/j.1365-2818.1990.tb03045.x.
- ZHANG W, EVANS KE. (1990) DESIGN OF LAMINATES WITH SPECIFIED MECHANICAL-PROPERTIES, COMPOSITE MATERIALS : DESIGN AND ANALYSIS, pages 69-81. [PDF]
- Evans KE, Nkansah MA. (1990) Thermal modeling of laser-addressed liquid-crystal displays, Journal of Applied Physics, volume 67, no. 11, pages 6654-6660, DOI:10.1063/1.345099.
- Nkansah MA, Evans KE. (1990) Modeling delamination due to thermal stress in optical storage media, Journal of Applied Physics, volume 67, no. 7, pages 3243-3248, DOI:10.1063/1.345356.
- Zhang WC, Evans KE. (1990) An analytical model for the elastic properties of fibrous composites with anisotropic constituents, Composites Science and Technology, volume 38, no. 3, pages 229-246, DOI:10.1016/0266-3538(90)90060-I.
1989
- Zhang W, Evans KE. (1989) Graphical representation of anisotropic failure envelopes, Engineering Computations, volume 6, no. 3, pages 209-216, DOI:10.1108/eb023776.
- Evans KE, Caddock BD, Nobes MJ. (1989) Microporous materials with negative Poisson’s ratios. II. Mechanisms and interpretation, Journal of Physics D: Applied Physics, volume 22, no. 12, pages 1883-1887, DOI:10.1088/0022-3727/22/12/013.
- AINSWORTH KL, EVANS KE. (1989) TRANSVERSE IMPACT OF FILAMENT-WOUND PIPES, COMPOSITE STRUCTURES 5, pages 333-345. [PDF]
- Caddock BD, Evans KE, Masters IG. (1989) Diffusion behaviour of the core-sheath structure in E-glass fibres exposed to aqueous HCl, Journal of Materials Science, volume 24, no. 11, pages 4100-4105, DOI:10.1007/BF01168981.
- Evans KE, Burgess AN, McLean RA. (1989) Modeling of time-dependent temperature profiles in multilayer optical storage media, Appl Opt, volume 28, no. 2, pages 328-334, DOI:10.1364/AO.28.000328. [PDF]
- Evans KE. (1989) Tensile network microstructures exhibiting negative Poisson’s ratio, Journal of Physics D: Applied Physics, volume 22, no. 12, pages 1870-1876, DOI:10.1088/0022-3727/22/12/011.
- Zhang W, Evans KE. (1989) Correlation between stress and strain based polynomial failure criteria, Composite Structures, volume 13, no. 2, pages 115-121, DOI:10.1016/0263-8223(89)90049-4.
- Caddock BD, Evans KE, Hull D. (1989) Diffusion of aqueous hydrochloric acid into polyester resins - Part 2 Effect of an applied stress on diffusion behaviour, Journal of Materials Science, volume 24, no. 3, pages 1005-1010, DOI:10.1007/BF01148790.
- Meduoye GO, Evans KE, Bacon DJ. (1989) Modelling of the growth of GaAs by the LEC technique. II. Thermal stress distribution and influence of interface shape, Journal of Crystal Growth, volume 97, no. 3-4, pages 709-719, DOI:10.1016/0022-0248(89)90574-5.
- Evans KE, Ferrar MD. (1989) The packing of thick fibres, Journal of Physics D: Applied Physics, volume 22, no. 2, pages 354-360, DOI:10.1088/0022-3727/22/2/020.
- Caddock BD, Evans KE. (1989) Microporous materials with negative Poisson’s ratios. I. Microstructure and mechanical properties, Journal of Physics D: Applied Physics, volume 22, no. 12, pages 1877-1882, DOI:10.1088/0022-3727/22/12/012.
- Nkansah MA, Evans KE. (1989) Thermal stresses in multilayer optical-storage media, Journal of Applied Physics, volume 66, no. 1, pages 50-56, DOI:10.1063/1.343855.
1988
- Evans KE, Caddock BD, Ainsworth KL. (1988) Statistical changes during the corrosion of glass fibre bundles, Journal of Materials Science, volume 23, no. 8, pages 2926-2930, DOI:10.1007/BF00547471.
- Zhang W, Evans KE. (1988) A strain-based tensor polynomial failure criterion for anisotropic materials, The Journal of Strain Analysis for Engineering Design, volume 23, no. 4, pages 179-186, DOI:10.1243/03093247V234179.
- Evans KE, Abbott SJ, Burgess AN. (1988) Finite element modeling of laser-induced hole formation in optical storage media, Appl Opt, volume 27, no. 4, pages 732-735, DOI:10.1364/AO.27.000732. [PDF]
- Evans KE, Nkansah MA, Abbott SJ. (1988) Finite element analysis of thermal stresses in optical storage media, Journal of Applied Physics, volume 64, no. 7, pages 3398-3401, DOI:10.1063/1.341524.
- Zhang WC, Evans KE. (1988) Numerical prediction of the mechanical properties of anisotropic composite materials, Computers and Structures, volume 29, no. 3, pages 413-422, DOI:10.1016/0045-7949(88)90394-X.
- Meduoye GO, Bacon DJ, Evans KE. (1988) The minimisation of thermal stresses during the growth of GaAs crystals, Journal of Crystal Growth, volume 88, no. 3, pages 397-410, DOI:10.1016/0022-0248(88)90014-0.
- Evans KE. (1988) Thermal stress mechanisms in optical storage thin films, Journal of Applied Physics, volume 63, no. 10, pages 4946-4950, DOI:10.1063/1.340438.
- Evans KE, Caddock BD, Ainsworth KL. (1988) Statistical changes during the corrosion of glass-fibre bundles.
- Zhang W, Evans KE. (1988) Effect of changes in elastic constants on the strength of composites, The Journal of Strain Analysis for Engineering Design, volume 23, no. 4, pages 213-221, DOI:10.1243/03093247V234213.
1987
- Evans KE, Burgess AN, Abbott SJ. (1987) FINITE ELEMENT MODELLING OF LASER-INDUCED HOLE FORMATION IN OPTICAL STORAGE MEDIA, pages 136-137.
- Burgess AN, Evans KE, MacKay M, Abbott SJ. (1987) Comparison of transient thermal conduction in tellurium and organic dye based digital optical storage media, Journal of Applied Physics, volume 61, no. 1, pages 74-80, DOI:10.1063/1.338803.
- Evans KE, Zhang WC. (1987) The determination of the normal interaction term in the Tsai-Wu tensor polynomial strength criterion, Composites Science and Technology, volume 30, no. 4, pages 251-262, DOI:10.1016/0266-3538(87)90014-5.
- Caddock BD, Evans KE, Hull D. (1987) The diffusion of hydrochloric acid in polyester thermosetting resins, Journal of Materials Science, volume 22, no. 9, pages 3368-3372, DOI:10.1007/BF01161206.
- Evans KE. (1987) A scaling analysis of the fracture mechanisms in glassy polymers, Journal of Polymer Science Part B: Polymer Physics, volume 25, no. 2, pages 353-368, DOI:10.1002/polb.1987.090250208.
1986
- Caddock BD, Evans KE, Hull D. (1986) ROLE OF DIFFUSION IN THE MICROMECHANISMS OF STRESS CORROSION CRACKING OF E-GLASS/POLYESTER COMPOSITES, I Mech E Conference Publications (Institution of Mechanical Engineers), pages 55-62.
- Evans KE, Gibson AG. (1986) Prediction of the maximum packing fraction achievable in randomly oriented short-fibre composites, Composites Science and Technology, volume 25, no. 2, pages 149-162, DOI:10.1016/0266-3538(86)90040-0.
1985
- Evans KE, Donald AM. (1985) Concentration dependence of the primitive path step length, Polymer, volume 26, no. 1, pages 101-104, DOI:10.1016/0032-3861(85)90063-1.
1982
- Evans KE. (1982) SCALING ANALYSIS FOR THE DYNAMICS OF HIGHLY ENTANGLED STAR POLYMERS, Journal of polymer science. Part B, Polymer letters, volume 20, no. 2, pages 103-108, DOI:10.1002/pol.1982.130200205.
- Edwards SF, Evans KE. (1982) Dynamics of highly entangled rod-like molecules, Journal of the Chemical Society, Faraday Transactions 2: Molecular and Chemical Physics, volume 78, no. 1, pages 113-121, DOI:10.1039/F29827800113.
1981
- Edwards SF, Evans KE. (1981) COMPUTER STUDIES OF POLYMER DYNAMICS IN MELTS, American Chemical Society, Polymer Preprints, Division of Polymer Chemistry, volume 22, no. 1, pages 183-184.
- Evans KE, Edwards SF. (1981) Computer simulation of the dynamics of highly entangled polymers. Part 1. - Equilibrium dynamics, Journal of the Chemical Society, Faraday Transactions 2: Molecular and Chemical Physics, volume 77, no. 10, pages 1891-1912, DOI:10.1039/F29817701891.
- Evans KE. (1981) Computer simulation of the dynamics of highly entangled star polymers, Journal of the Chemical Society, Faraday Transactions 2: Molecular and Chemical Physics, volume 77, no. 12, pages 2385-2399, DOI:10.1039/F29817702385.
- EDWARDS SF, EVANS KE. (1981) THE THEORY OF POLYMER MELTS, ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, volume 181, no. MAR, pages 59-POLY. [PDF]
- Edwards SF, Evans KE. (1981) Computer simulation of the dynamics of highly entangled polymers. Part 2. - Static properties of the primitive chain, Journal of the Chemical Society, Faraday Transactions 2: Molecular and Chemical Physics, volume 77, no. 10, pages 1913-1927, DOI:10.1039/F29817701913.
- Evans KE, Edwards SF. (1981) Computer simulation of the dynamics of highly entangled polymers. Part 3. - Dynamics of the primitive chain, Journal of the Chemical Society, Faraday Transactions 2: Molecular and Chemical Physics, volume 77, no. 10, pages 1929-1938, DOI:10.1039/F29817701929.