MSc Water Engineering

Duration Full time 1 year
Discipline
  • Engineering
LocationExeter (Streatham)
Start date September

Overview

MSc Water Management student video: SUDS Not DUDS

View full size.

  • Accredited by the Joint Board of Moderators (JBM) on behalf of the Engineering Council for the purposes of meeting the requirements for Further Learning for registration as a Chartered Engineer for candidates who have already acquired an Accredited CEng (Partial) BEng (Hons) undergraduate first degree.
  • Linked to the University of Exeter’s Centre for Water Systems
  • A choice of pathways available so you can focus on your technical engineering skills, or combine these with management skills through the MSc Water Engineering with Management pathway

This programme is designed for engineering graduates wishing to enhance their capabilities in urban water design, operation and management, or engineers working in the water industry looking to enhance their knowledge and skills in this area.

It draws upon the expertise of our Centre for Water Systems, which is internationally renowned for its research into water supply and distribution systems, waste water and urban drainage systems, integrated modelling, risk and uncertainty, whole-life costing, water efficiency, catchment-based management, spatial water management,  and associated areas.

The programme is highly relevant to the needs of future water engineers and will provide you with knowledge and key skills in the broad area of urban water engineering and management, equipping you to solve modern day engineering problems.

Water engineering is of significant global interest and highly trained graduates are highly sought after. Graduates can expect to take on exciting roles in consultancies, water utilities, contractors, regulatory bodies, government agencies, and international organisations following successful completion of the programme.

I currently work as an engineer for Faber Maunsell AECOM; a leading international consultancy. My employer recognised the importance for me to obtain a relevant and up-to-date Masters and it was their recommendation that I enrolled as a part time student with the University of Exeter.

The University of Exeter is a fantastic place to study and one that supports achievement in all career aspirations. Since joining I’ve been selected as one of the Institution of Civil Engineers (ICE) President’s apprentices. This involves shadowing ICE President Jean Venables OBE for some of her presidential duties throughout the year. Exeter has been wholly supportive of this great opportunity, with the flexibility and industrial focus of the programme making it possible to do both.

The lectures and tutorials are responsive to my needs and I’m part of one of the most productive learning environments I could wish for. I attend lectures every Tuesday and by Wednesday I have already put the knowledge into practise!

Ben Ward, MSc Water Management graduate.

MSc Water Engineering with Management pathway available

View course »

Programme structure

This programme is modular and flexible, carrying 180 credits in total and offering flexibility in choice of modules studied.

MSc Water Engineering consists of nine core engineering modules totalling 150 credits, which includes the 60-credit Engineering MSc project.

The programme begins in September each year and the taught elements are concluded by May. The Engineering MSc project, under the personal supervision of a research expert in the chosen area, continues until September.

The modules we outline here provide examples of what you can expect to learn on this degree course based on recent academic teaching. The precise modules available to you in future years may vary depending on staff availability and research interests, new topics of study, timetabling and student demand.

Flexible, Part-Time Graduate Study

Undertake postgraduate level study, without leaving your job

  • Enables industry professionals to learn and earn – part time study, with intensive module blocks
  • Gain an MSc in either 2 or 4 years – each module is delivered in an intensive 2 or 3 week period at the University of Exeter
  • Deliver a Project based on your expertise – a 60 credit Project can be focussed on your company
  • Fully accredited degree programmes

These MSc Engineering programmes are available as either a 2-year or 4-year part-time study.

  • MSc Water Engineering 
  • MSc Structural Engineering 
  • MSc Civil Engineering
  • MSc Materials Engineering
  • MSc Mechanical Engineering 
  • MSc Mechanical Engineering with Management
  • MSc Materials Engineering with Management
  • MSc Civil Engineering with Management 
  • MSc Structural Engineering with Management
  • MSc Water Engineering with Management

Structure

To complete an MSc 180 credits need to be completed, of which there are 8 x 15-credit taught modules and an additional 60-credit Project.

Each 15-credit module is delivered in an intensive 2-3 week block at the University of Exeter. This allows part-time students in full-time employment to complete their programme in short, concentrated blocks.

Modules are taught once per year, and precise dates of each module will be made available. It is not possible to delay modules and due to the intensive programme, students must attend all sessions.

All modules will be taught to both full and part-time students.

Example Structure – 2-year programme

Year 1

Term 1

Module 1 (15)

2-3 weeks

   

Module 2 (15)

2-3 weeks

   

Exams

1-2 days

 

Term 2

Module 3 (15)

2-3 weeks

   

Module 4 (15)

2-3 weeks

   

Exams

1-2 days

Year 2

Term 1

Module 5 (15)

2-3 weeks

   

Module 6 (15)

2-3 weeks

   

Exams

1-2 days

 

Term 2

Module 7 (15)

2-3 weeks

   

Module 8 (15)

2-3 weeks

   

Exams

1-2 days

 

Term 3

Project (60)

Distance Learning

Example Structure – 4-year programme

Year 1

Term 1

Module 1 (15)

2-3 weeks

   

Exams

1 day

 

Term 2

Module 2 (15)

2-3 weeks

   

Exams

1 day

Year 2

Term 1

Module 3 (15)

2-3 weeks

   

Exams

1 day

 

Term 2

Module 4 (15)

2-3 weeks

   

Exams

1 day

Year 3

Term 1

Module 5 (15)

2-3 weeks

   

Exams

1 day

 

Term 2

Module 6 (15)

2-3 weeks

   

Exams

1 day

Year 4

Term 1

Module 7 (15)

2-3 weeks

   

Exams

1 day

 

Term 2

Module 8 (15)

2-3 weeks

   

Exams

1 day

 

Term 3

Project (60)

Distance Learning

Modules

1 19 September 2016 ECMM113 Agile, Lean and Competitive Enterprise
1 19 September 2016 ECMM171 Programming for Engineering
2 10 October 2016 ECMM107 Mechanics of Materials
2 10 October 2016 ECMM149 Linear Systems and Structural Analysis
2 10 October 2016 ECMM124 Hydroinformatics Tools
3 31 October 2016 ECMM112 Manufacturing Supply Chain Management
3 31 October 2016 ECMM136 Systems Analysis in Engineering
3 31 October 2016 ECMM127 Advanced Materials Engineering
3 31 October 2016 ECMM150 Structural Design
3 31 October 2016 ECMM133 Water Supply and Distribution Management
4 21 November 2016 ECM3153 Management of Product Development
4 21 November 2016 ECMM148 Advanced CFD
4 21 November 2016 ECMM160 Engineering Materials and the Environment
4 21 November 2016 ECMM109 Advanced Geotechnical Engineering
4 21 November 2016 ECMM153 Conceptual Design of Buildings
4 21 November 2016 ECMM162 Water Management in Developing Countries
5 16 January 2017 ECMM128 Management Concepts
5 16 January 2017 ECMM163 Sustainable Engineering
5 16 January 2017 ECMM140 Vibration Engineering
6 06 February 2017 ECMM168 Project Management
6 06 February 2017 ECMM142 Contemporary Advanced Materials Research
6 06 February 2017 ECMM108 Advanced Structural Engineering
6 06 February 2017 ECMM151 Introduction to Earthquake Engineering
6 06 February 2017 ECMM134 Environmental Processes
7 27 February 2017 ECMM172 Management Science
7 27 February 2017 ECMM158 Active and Passive Structural Control
7 27 February 2017 ECMM110 Water and Environmental Systems
8 20 March 2017 ECMM103 Computer Aided Engineering Design
8 20 March 2017 ECMM159 Structural Health Monitoring
8 20 March 2017 ECMM132 Urban Drainage and Waste Water Management

Pricing

Pricing for the part-time programmes will be scaled with the full time MSc.

4-year programme = ¼ full-time price per year

2-year programme = ½ full-time price per year

Please note: Fees are subject to an annual increase in line with University pricing.

If you are being sponsored by your company please attach a sponsorship letter with your application so that we can invoice appropriately.

Learning and teaching

Teaching and assessment

The programme is delivered through a mix of lectures, seminars, tutorials, industrial presentations, case studies, industry visits, computer simulations, project work and a dissertation.

The programme will have particular value in developing transferable skills development including management skills, communication skills, computational techniques, data handling and analysis, problem solving, decision making and research methodology. Many of these skills will be addressed within an industrial and commercial context.

You will be allocated a Personal Tutor who is available for advice and support throughout your studies, along with support and mentoring from graduates who are now placed in industry. There is also a Postgraduate Tutor available to help with further guidance and advice.

A research- and practice-led culture

We believe every student benefits from being taught by experts active in research and practice. You will discuss the very latest ideas, research discoveries and new technologies in seminars and in the field and you will become actively involved in a research project yourself. All our academic staff are active in internationally-recognised scientific research across a wide range of topics. You will also be taught by leading industry practitioners.

Careers

There is considerable demand in the workplace for graduates with knowledge in both a specialist technology area and in management, particularly in the modern tools and techniques to support the management of a dynamically changing engineering business.

Recent graduates have taken employment in a variety of sectors, including both large companies and small and medium sized enterprises.

Professional accreditation

This degree has been accredited by the Joint Board of Moderators under licence from the UK regulator, the Engineering Council for the purposes of meeting the requirements for Further Learning for registration as a Chartered Engineer for candidates who have already acquired an Accredited CEng (Partial) BEng (Hons) undergraduate first degree. Accreditation is a mark of assurance that the degree meets the standards set by the Engineering Council in the UK Standard for Professional Engineering Competence (UK-SPEC). An accredited degree will provide you with some or all of the underpinning knowledge, understanding and skills for eventual registration as an Incorporated (IEng) or Chartered Engineer (CEng). Some employers recruit preferentially from accredited degrees, and an accredited degree is likely to be recognised by other countries that are signatories to international accords.

It should be noted that candidates completing the MSc who hold an underpinning accredited IEng degree or a non-accredited bachelor degree will need to apply for an academic assessment with the relevant engineering institution to determine whether they will meet the educational base for CEng registration.

Entry requirements 2017

A good honours degree from a recognised university. We do consider all applications where there is evidence of exceptional performance in modules relevant to the programme of study, significant relevant work experience or professional qualifications

Non-engineering graduates are encouraged to apply. Click here for more information

Requirements for international students

If you are an international student, please visit our international equivalency pages to enable you to see if your existing academic qualifications meet our entry requirements.

English language requirements

IELTS (Academic)

Overall score 6.5. No less than 6.0 in any section.

TOEFL IBT*

Overall score 90 with minimum scores of 21 for writing, 21 for listening, 22 for reading and 23 for speaking.

Pearson Test of English (Academic)

58 with no less than 55 in all communicative skills.

Cambridge English: Advanced & Proficiency

Overall score 176. No less than 169 in any section.

Pre-sessional English

Applicants with lower English language test scores may be able to take pre-sessional English at INTO University of Exeter prior to commencing their programme. See our English language requirements page for more information.

Fees and funding

Tuition fees per year 2017/18

  • UK/EU: £9,000 full-time
  • International: £21,000 full-time

Fee information

Fees can normally be paid by two termly instalments and may be paid online. You will also be required to pay a tuition fee deposit to secure your offer of a place, unless you qualify for exemption. For further information about paying fees see our Student Fees pages.

UK government postgraduate loan scheme

Postgraduate loans of up to £10,000 are now available for Masters degrees. Find out more about eligibility and how to apply.

Current available funding

Contact us

If you have any questions about any of our taught masters programmes, please contact us:

Tel: +44 (0) 1392 724061
Email: engineeringmsc@exeter.ac.uk